SAICOS Premium Hardwax-Oil

For the professional user! SAICOS Hard Wax Oil Raw Look is an open-pored special primer. Advantages preserves the raw wood look oxidative drying special for light European wood species based on natural and plant-based raw material slow odour during application High-quality one-coat systemSAICOS Hard Wax Oil Raw Look is an open-pored special primer that preserves the natural and uncoated character of light European wood species (raw wood look of e.g. oak, ash, beech etc.). It is healthy for living and suitable for wood - based on natural plant-based raw materials - moisture-regulating, breathable, reduces swelling and shrinkage. SAICOS Hard Wax Oil Raw Look is low-odour and odourless after drying, and the natural oils penetrate particularly deeply into the wood, protecting it from the inside and keeping it elastic. Floors treated with SAICOS Hard Wax Oil Raw Look and SAICOS Premium Hard Wax Oil are dirt and water repellent and extremely hard-wearing. Coffee, wine or aggressive fruit juices cannot penetrate and can be easily removed. Moisture cannot harm the open-pored coating. SAICOS Hard Wax Oil Raw Look bonds permanently with the wood - so there is no need to sand it down when renovating. Usage 1 x SAICOS Hard Wax Oil Raw Look1 x SAICOS Premium Hard Wax Oil in the desired gloss level Consumption Consumption is approx. 15 g/m² per application, resulting in a yield per litre of approx. 65 m². Preparation The surface to be treated must be clean and dry (wood moisture max. 12 %). Stain or sand varnished wood (final sanding 120 - 150 grit). Remove sanding dust thoroughly. Application Application with pad machine. SAICOS Hard Wax Oil Raw Look is ready to use - do not dilute. Stir well before use. Roll the product evenly onto 5-6 m2 of surface in strips approx. 20 cm apart (Saicos Oil/Wax Roller) and then polish in with a single disc machine and white pad. This product can also be applied by machine.

For faster drying and higher resilience At construction sites, work is often done under time pressure and special climatic conditions. To finish a coat in just one day, we therefore recommend Premium Additive Hardener 2K. It enables faster drying and greater final hardness. Benefits Additive for SAICOS Premium Hardwax-Oil, SAICOS Ecoline Hardwax-Oil and SAICOS Ecoline Oil Ground CoatSurface can be used earlierGreater final hardness and increased abrasion resistanceSuitable for Ultra-matt Plus, Matt, Semi-Matt and Glossy Also for use in private households  With Premium Additive Hardener 2K in SAICOS Premium Hardwax-Oil, the oil dries faster, especially under difficult conditions such ashigh humidity. In general, the treated surfaces are more resilient and abrasion-resistant earlier.Premium Additive Hardener 2K is also suitable for SAICOS Ecoline Oil Ground Coat and SAICOS Ecoline Hardwax-Oil.The quantities in the additive containers are precisely matched to the respective can contents of SAICOS Premium Hardwax-Oil.

Ensures a non-slip surface on wooden floors Floors can be quite slippery at times. The anti-slip additive ensures a safe, non-slip coating. Benefits Additive for SAICOS Premium Hardwax-OilTo increase skid resistance R10Suitable for Ultra-matt, Matt, Semi-Matt and Glossy Slipping and sliding is a thing of the past Safety and comfort are paramount here. The Premium Additive Anti-Slip R10 in SAICOS Premium Hardwax-Oil ensures a non-slip surface that can be walked on with smooth shoe soles or socks.The quantities in the additive containers are precisely matched to the respective can contents of SAICOS Premium Hardwax-Oil.

Works against the natural colour changes caused by UV rays Wood is exposed to the sun every day. If it is not coated with Ecoline UV Protection as a precaution, UV rays change its colour in the long run. Benefits Additive for SAICOS Premium Hardwax-OilImproves UV protectionSuitable for Ultra-matt Plus, Matt, Semi-Matt and Glossy For preservation of the original colour We recommend the addition of Premium Additive UV Protection in SAICOS Premium Hardwax-Oil so that you can enjoy the original colour of your floor for longer. Because this reduces the natural colour change of the wood by exposure to light.The quantities in the additive containers are precisely matched to the respective can contents of SAICOS Premium Hardwax-Oil.

Special set for treating floors. For optimal application of Osmo Hardwax-Oil. Optimal floor finish – microfibre roller holds a large amount of product and distributes evenly.Multiple-use tray due to tray inserts – very economical.Inserts also available separately.

The right brush for any project Large surfaces or small corners - the Flat Brush plastic bristles are suitable for all dimensions and ensure easy application of paints, oils, waxes or stains. The wooden handle, which is comfortable to hold, makes for easy handling of the Flat Brush . Benefits For the application of water and oil-based paintsSizes: 30/50/60/100 mm widthEasy to clean paintbrushesFor an even application of paint Small, medium, large - we have the right Flat Brush for any project. The products sit comfortably in the hand and ensure an even application of paint. Due to their excellent processing and the high quality synthetic bristles, the brushes are particularly durable and can be used for all SAICOS coatings with oil and water bases. They also ensure an especially even stoke result. This is also guaranteed by the working widths of the Flat Brush from 30 to 100 mm, which means that any surface size can be optimally treated. Correct cleaning of paints, oils, waxes and stains is important so you can take full advantage of the Flat Brush. If these paint residues remain in the Flat Brush , the bristles can come loose or stick together so that it is no longer possible to work evenly. Water-based paint residues can be easily cleaned with water. For oil-based paints or stains, we recommended SAICOS Brush Cleaner. Using the Flat Brushfor coating is therefore only recommended when perfectly clean to achieve a perfect result. The right brush Every application requires a different Flat Brush. That is why we offer models in different sizes. This means you can do anything, from precise detailed work to the treatment of large areas. Due to the special processing of the plastic bristles, they can absorb a particularly large amount of material, making work effortless. Wood paints Our paint coatings for various types of wood can be used very easily with the various Flat Brushes. As they are coordinated to one another, they complement each other both in terms of uniformity and in terms of the colour result. This means that even application is possible and you save yourself repeated painting and time. Applying stains When applying a stain, it depends on the individual product whether pretreatment (impregnation / priming) is necessary. Many SAICOScoatings are easy to clean and paint over when renovating. (Please note the respective technical data sheets for the products.) In the case of third-party paints, it is generally advisable to remove remaining paints in order to achieve an ideal result. Remnants of old paints could also significantly affect the protection of the product. To use: Apply generously, quickly and in layers in the wood grain direction, avoid overlapping of the layers of paint.

For oil & water systems.Sizes:30 mm50 mm60 mm100 mm